Ocean Floor Ring

Created by Susan Johnson



 

Supplies:

Flat Ring – Amate Studios™

Clear UTEE - Ranger Inc™

Perfect Medium - Ranger Inc™

Perfect Pearls- Ranger Inc ™

Perfect Pearls Brush – Ranger Ink ™

Glossy Accents – Ranger Ink ™

Magic Glos™ – Lisa Pavelka

Micro Beads

Foils

Textured Stamp (red rubber type)

Heat Tool

2 small pieces of wood or round nose pliers

Directions:

1. Ink Ring with Perfect Medium.
2. Pour Clear UTEE onto ring. Shake excess UTEE off of ring.
3. Place ring between 2 small pieces of wood to hold up ring or hold ring with round nose pliers. Heat UTEE, melting the UTEE. DO NOT HOLD RING WHILE HEATING THE UTEE. THE RING WILL GET VERY HOT!!! 
4. While still hot pour more UTEE onto ring. Heat UTEE, melting the UTEE.
5. Repeat step 4 several more times to get a thick layer of UTEE. You want at least an 1/8” thickness.
6. When you are finished adding the last layer of UTEE press a textured stamp onto the UTEE while the UTEE is still warm. Let UTEE and ring cool. (You do not need to ink up the textured stamp with any ink, the stamp will release on it's own)
7. Ink UTEE with Perfect Medium.
8. Apply Perfect Pearls over the Perfect Medium.
9. Add a small amount of Glossy Accents to use as glue to adhere Micro Beads and or Foils.
10. Cover UTEE/Beads/Foil with Magic Glos™. Follow directions to cure Magic Glos™ .
11. Enjoy wearing your ring!